1 - 89 description technical data the compact 19 power-d-box features aluminium profiled cross members with an anodised front plate. the panel cutout accommodates up to 30 positions numbered 1 to 30. blanks cover unused positions, with 6, 12, 24 or 30 being open. the rack can be fitted with plug-in type circuit breakers 3600/3900 and 2210, electronic circuit breakers ess20 or electronic circuit protector esx10 or e-t-a solid state remote power controllers (ssrpc) e- 1048-600/700. please specify the correct option according to the ordering information shown, as different depths as well as different heights of the front cut-out must be allowed for. the devices are plugged into sockets 63-p10-si (6 positions each). these sockets (s1...s5) are provided with 6.3 mm blade terminals on the rear. four busbars (x1...x4) with 6 (signalisation) or 15 (feed) positions each (6.3 mm blade terminals) provide easy terminal connection. prewired options available ex factory are: l parallel connected feed (2.5 mm 2 ) with separate supply for each socket via busbars x1 and x2. choice of wiring colours: black, red, blue, grey. outputs are not connected. l parallel connected auxiliary contacts (n/c) grouped per socket, 1 mm 2 , via busbars x3 (supply) and x4 (signalisation). choice of wiring colours: black, red, blue, grey. l series connected auxiliary contacts (n/o) of all positions with 1 mm 2 , via busbars x3 (feed) and x4 (signalisation). choice of wiring colours: black, red, blue, grey. l custom designed connection according to specification. other fittings, e.g. back-up fuse, separate circuits or redundancy, multipole circuits, screw terminals, custom designed markings etc., are available to special order (please enquire). a compact printed circuit board with rear screw terminals is available as an alternative to the standard cable wiring. power-d-box with sockets pre-wired 19 power-d-box length: 84 modules (426.72 mm) height: 2 u (88.90 mm) depth: 205...295 mm (depending on the selected version) material: aluminium, anodized front cutout for 1 socket = 6 positions (no. 1 - 6) 30 positions, numbered 2 sockets = 12 positions (no. 1 - 12) 1 through 30 3 sockets = 18 positions (no. 1 - 18) 4 sockets = 24 positions (no. 1 - 24) 5 sockets = 30 positions (no. 1 - 30) blanks cover unused sockets. mounting socket polarised e-t-a mounting socket type 63-p10-si (6 positions) rear blade terminals 6.3 mm max. load: 16 a continuous busbars 15-way for 6.3 mm blade terminals feed (x1, x2) max. current rating: 63 a busbars 6-way for 6.3 mm blade terminals auxiliary contacts (x3, x4) max. current rating: 32 a feed busbar 50 a per socket (= 6 positions) ho7z-k cables 2.5 mm 2 with fully insulated 6.3 mm blade terminals to vbg 4 one cable per socket max. current rating: 20 a auxiliary contact wiring ho7z-k cables 1 mm 2 with fully insulated 6.3 mm blade terminals to vbg 4 max. current rating: 4 a wire colour option black, red, blue or grey voltage rating ac 250 v/dc 65 v housing ground/earth on the inside via m6 screw by means of ring cable lug (two with redundant systems) www.e-t-a.de power-d-box with sockets pre-wired 1 2013/14
1 - 90 dimensions 465 482.6 76.2 205 (250/295) 88.1 19bgt -2-3600-30a0-b 0 line entry ground screw m6 bottom view 19bgt -2-ess20-30a0-b0 blanking piece y30856341 19bgt -2-ess20-30a0-b0 19bgt -2-esx10-30a0-b 0 fitted with circuit protector type ess20 shown for esx10 205 (250/295) 88.1 76.2 465 482.6 61 top view 86.5 61 bottom view 19bgt -2-2210-30a0-b0 44.6 19bgt -2-2210-30a0-b 0 top view 61 44 supply auxiliary contacts signal installation depth 205 mm (without additional wiring, standard) installation depth 250/295 mm, depending on additional wiring 3 19 18.31 2.40 3.47 fitted with circuit protector type esx10 2.40 3.40 line entry ground screw m6 supply auxiliary contacts signal blanking piece y30856301 1.75 18.31 19 3 3.47 installation depth 205 mm (without additional wiring, standard) installation depth 250/295 mm, depending on additional wiring fitted with circuit breaker type 2210 fitted with circuit breaker type 3600/3900 1.73 2.40 shown for type 3600/3900 this is a metric design and millimeter dimensions take precedence ( mm ) inch ordering information type no. 19bgt 19 power-d-box with sockets pre-wired height 1 1 u 2 2 u 3 3 u prepared for circuit breaker types (supplied separately) 2210 for circuit breaker type 2210 3600 for circuit breaker type 3600/3900 1048 for ssrpc e-1048-600 ess20 for electronic circuit breaker type ess20 esx10 for electronic circuit protector type esx10 number of positions 06 6-poles 12 12-poles 18 18-poles 24 24-poles 30 30-poles nn number of poles (special version) feed prewired a0 without r0 without, redundant a2 line feed pre-wired (2.5 mm 2 ) 1-pole (or 1 circuit) r2 line feed pre-wired 1-pole redundant a4 line feed pre-wired (2.5 mm 2 ) 2-pole (or 2 circuits) r4 line feed pre-wired 2-pole redundant a6 line feed pre-wired 3-pole (or 3 circuits) r6 line feed pre-wired 3-pole redundant a8 line feed pre-wired 4-pole (or 4 circuits) r8 line feed pre-wired 4-pole redundant wire colour (not with a0 + r0) 1-pole sw black rt red bl blue gr grey 2-pole rb 1 st pole red, 2 nd pole blue rs 1 st pole red, 2 nd pole black sb 1 st pole black, 2 nd pole blue 3-pole sw 1 st pole to 3 rd pole black sb 1 st pole to 2 nd pole black, 3 rd pole blue 4-pole sw 1 st pole to 4 th pole black sb 1 st pole to 3 rd pole black, 4 th pole blue auxiliary contacts prewired (1 mm 2 ) b0 without b1 auxiliary contacts connected in series (please consider plug-in device) b2 auxiliary contacts connected in parallel (please consider plug-in device) wire colour (not with b0) sw black rt red bl blue gr grey (standard) s... customer-specific version 19bgt - 2 - 2210 - 24 a2 sw - b1 gr - s... ordering example power-d-box with sockets pre-wired www.e-t-a.de power-d-box with sockets pre-wired 1 2013/14
1 - 91 24 12 23 11 line 1 2(k) i > e-1048-600 2210 3600/3900 3 from i n =8 a 7 6 line 1 3 2 5 4 i > control and protection electronic f + f - control circuit fault indication circuit red green load q -u s +u s e-1048-600 in + in - 7 3 2 5 4 6 1 internal connection diagrams ess20-003- ? (group signalisation with change over) r sense control so si sc signal output load (+) line (+) dc 24 v status indicatio green / orange rated current i n on / off load output short circuit / overload current measurement electronic control unit gnd (-) 3 a 6 a esx10-124-? failsafe r sense line (+) dc 24 v load (+) load output gnd (-) sf signal output re reset output re reset input status indication green / orange / red s1 on / off electronic control unit www.e-t-a.de power-d-box with sockets pre-wired 1 2013/14 power-d-box with sockets pre-wired
1 - 92 termination 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 busbar x1 (max. 63 a) pre-wiring of signalisation, group signalisation - series connection line terminal x22150301 10...16 (25) mm 2 , plug-on type (optional) 1 mm 2 signal busbar x3 signal busbar x4 f1 f2 f6 f7 f8 f12 f25 f26 f30 socket type 63-p10-si (6-way) circuit breaker types 2210-s21x.../3600.../3900 plug-in type (not included) 2210 2 12 24 n.c. 23 11 1 3600/ 3900 1 4 6 3 7 5 2 pin assignment socket 63-p10-si (per pole) load terminal pin 1, blade terminals 6.3 mm auxiliary contact terminals: 11-12 make contact, blade terminals 6.3 mm auxiliary contact terminals: 23-24 break contact, blade terminals 6.3 mm 19bgt -2-2210/3600-30a0- b1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 1 mm 2 f1 f2 f6 f7 f8 f12 f25 f26 f30 circuit breaker types 2210-s21x.../3600.../3900... plug-in type (not included) 2210 2 12 24 n.c. 23 11 1 3600/ 3900 1 4 6 3 7 5 2 19bgt -2-2210/3600-30a0-b2 22 41 2 12 31 1 1 mm 2 plugged-in busbar 6-way 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 pre-wiring of line feed, 1-pole protected by return busbar f1 f2 f6 f7 f25 f26 f30 2210 2 12 24 n.c. 23 11 1 3600/ 3900 1 4 6 3 7 5 2 load terminals 1. pole to pin 1, blade terminals 6.3 mm load terminals 2. pole to return busbar x2, blade terminals 6.3 mm auxiliary contact terminals: 11-12 make contact, blade terminals 6.3 mm auxiliary contact terminals: 23-24 break contact, blade terminals 6.3 mm 19bgt -2-2210/3600-30a2 -b0 22 41 2 12 31 1 2.5 mm 2 2.5 mm 2 2.5 mm 2 f8 f12 return busbar x2 (max. 63 a) 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 22 41 2 12 31 1 a1 a2 a6 a15b 25 b30 2210 2 12 24 n.c. 23 11 1 3600/ 3900 1 4 6 3 7 5 2 19bgt -2-2210/3600-30 r2-b0 22 41 2 12 31 1 2.5 mm 2 2.5 mm 2 2.5 mm 2 a16b 1 22 41 2 12 31 1 b2 b26 2.5 mm 2 plugged-in busbar 6-way group a separation line f1 f2 f3 f4 f13f 14 f15 2210 2 12 24 n.c. 23 11 1 3600/ 3900 1 4 6 3 7 5 2 load terminals: pin 1 (+/-), pin 3 (+/-), blade terminal 6.3 mm auxiliary contact terminals: 11-12 make contact, blade terminals 6.3 mm auxiliary contact terminals: 23-24 break contact, blade terminals 6.3 mm 19bgt -2-2210/3600-30 a4-b0 f5 f6 22 41 2 12 31 1 4 3 22 41 2 12 31 1 4 3 22 41 2 12 31 1 4 3 22 41 2 12 31 1 4 3 22 41 2 12 31 1 4 3 22 41 2 12 31 1 4 3 22 41 2 12 31 1 4 3 22 41 2 12 31 1 4 3 22 41 2 12 31 1 4 3 2. 5 mm 2 +/ l -/ n f1 f2 f6 f7 f25f 26 f30 electronic circuit breaker type ess20 or electronic circuit protector plug-in type (not included) ess20 line gnd sc n.c. so load esx10 1l in e 11gnd 13sc n.c. 14so 2l oad load terminals load(+), blade terminals 6.3 mm a uxiliary contact terminals sc-so make contact, blade terminals 6.3 mm 19bgt -2-ess20/esx10-30 a4 -b0 f8 f12 2.5 mm 2 sc load (+ ) so load (+ ) gn d ess20 sc load (+ ) so load (+ ) gn d ess20 sc load (+ ) so load (+ ) gn d ess20 sc load (+ ) so load (+ ) gn d ess20 sc load (+ ) so load (+ ) gn d ess20 sc load (+ ) so load (+ ) gn d ess20 sc load (+ ) so load (+ ) gn d ess20 sc load (+ ) so load (+ ) gn d ess20 sc load (+ ) so load (+ ) gn d ess20 2.5 mm 2 2.5 mm 2 2.5 mm 2 pre-wiring of signalisation, group signalisation - parallel connection busbar x1 (max. 63 a) line terminal x22150301 10...16 (25) mm 2 , plug-on type (optional) signal busbar x3 signal busbar x4 socket type 63-p10-si (6-way) load terminal pin 1, blade terminals 6.3 mm auxiliary contact terminals: 11-12 make contact, blade terminals 6.3 mm auxiliary contact terminals: 23-24 break contact, blade terminals 6.3 mm pin assignment socket 63-p10-si (per pole) line terminal x22150301 25 mm 2 , plug-on type (optional) busbar x1 (max. 63 a) circuit breaker types 2210-s21x... /3600.../3900... plug-in type (not included) socket type 63-p10-si (6-way) plugged-in busbar 6-way line terminal x22150301 25 mm 2 , plug-on type (optional) pin assignment socket 63-p10-si (per pole) pre-wiring of line feed, 1-pole protected, redundant line terminal x22150301 25 mm 2 , plug-in type (optional) busbar x2 (max. 63 a) busbar x1 (max. 63 a) group b circuit breaker types 2210-s21x.../3600.../3900 plug-in type (not included) socket type 63-p10-si (6-way) load terminal pin 1, blade terminals 6.3 mm auxiliary contact terminals: 11-12 make contact, blade terminals 6.3 mm auxiliary contact terminals: 23-24 break contact, blade terminals 6.3 mm pin assignment socket 63-p10-si (per pole) pre-wiring of line feed, 2-pole protected/switched busbar x1 (max. 63 a) busbar x2 (max. 63 a) line terminal x22150301 25 mm 2 , plug-in type (optional) socket type 63-p10-si (6-way) pin assignment socket 63-p10-si (per pole) circuit breaker types 2210-s21x.../3600.../3900 plug-in type (not included) pre-wiring of line feed, 1-pole protected busbar x1 (max. 63 a) busbar x2 (max. 63 a) line terminal x22150301 10...16 (25) mm 2 , plug-on type (optional) plugged-in busbar 6-way socket type 63-p10-si (6-way) pin assignment socket 63-p10-si (per pole) power-d-box with sockets pre-wired www.e-t-a.de power-d-box with sockets pre-wired 1 2013/14
1 - 93 blanking piece for power-d-box (types 3600/3900, 2210) y 308 563 01 52 12.5 68.5 67 65 12.5 with ess20 .492 2.05 blanking piece for power-d-box (types ess20/esx10) y 308 563 41 12.5 .492 2.69 withdrawal tool for ess20/esx10 y 308 602 01 2.64 2.56 .492 with esx10 y 308 600 201 for removing the blanking piece: push in the screwdriver as shown below accessories 30 50 15 14 busbar x1, x2 blade terminals 6.3 mm cable cross section 10...25 mm 2 .551 .591 1.97 1.18 jumper to bypass looped thr ough unused auxiliary contacts (series connection) x 222 066 01 line terminal (max. 63 a) x 221 503 01 max. tightening torque 3.0 nm 10 51 50 11.5 2.01 .394 1.97 .453 blade terminals din 46244-a6.3-0.8 (qc .250) terminals 1+2 no inter nal connection terminals 6+7 inter nally bridged 14 63 752 x22206601 signalbrcke signal loop caution: cables must not be connected with terminal plugged in pull-out max. 10 nm this is a metric design and millimeter dimensions take precedence ( mm ) inch all dimensions without tolerances are for reference only. in the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. errors and omissions excepted. www.e-t-a.de power-d-box with sockets pre-wired 1 2013/14 power-d-box with sockets pre-wired
1 - 94 www.e-t-a.de 1 2013/14
|
